Ace Hydraulic Driven Centrifugal Pumps

PUMP MAY NOT BE IN STOCK AND MAY HAVE TO BE ORDERED FROM THE MANUFACTURER. SPECIAL PUMPS WILL HAVE TO BE ORDERED AND WILL BE MADE BY MANUFACTURER AFTER THE ORDER IS PLACED - 2 CURRENTLY IN STOCK

• Designed for starter fertilizer and small sprayer applications
• Replace 12V diaphragm pumps and roller pumps
• Tall Blade Impeller design - higher pressure at standard engine speeds
• All Polypropylene corrosion resistant construction
• The 204R motor requires 4 GPM (15.1 LPM) maximum hydraulic fluid input
• Integral Needle Valve bypasses up to 9 GPM (34 LPM) on Open Center Systems
• Standard Viton Carbon/Ceramic or Optional Severe Duty Silicon Carbide Mechanical Seal
• Polypropylene Corrosion Resistant Construction
• Stainless Steel Shaft and Hardware
  
  Recommended for:
• Pressure Compensating Closed Center Systems
• Open Center Systems up to 13 GPM (49.2 LPM) using internal needle valve
  
  Details
• Poly centrifugal driven by a 4 GPM hydraulic motor with integral needle valve
• Max Flow: 25 GPM
• Max Pressure: 100 PSI
• Maximum Fluid Temp: 140°F
• Suction: 1"
• Discharge: 3/4"
• Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period
• Do Not Run With Flow Shutoff for Extended Periods - Running the pump with no flow for extended periods of time will result in excessive heat and pump failure. A continuous bypass is recommended for low flow applications
  
  More Information
  Click here for Ace Product Sheet
  Click here for Ace Instruction Manual

California Proposition 65 Information and Warnings
State of California Proposition 65 Warnings

Items listed on this site are Known to the State of California to cause [Cancer] [Birth Defects or other Reproductive Harm.